摘 要
本次毕业设计主要探讨的是X5032型万能升降台铣床电气线路的改造。在认真研究X5032型万能升降台铣床基本结构和构造原理及对现有X5032型万能升降铣床电气线路进行了了解。初步了解了X5032型万能升降台铣床的基本结构特点及技术参数,以及对其现有的电气线路进行分析,决定运用PLC对现在使用的系统进行改造,并对其可行性做了探究。在查阅大量资料,相关文献和在充分熟悉老设备继电器控制电路的基础上,决定对X5032型万能升降台的电气线路做出改造,确定可以作为PC的输入信号与输出信号的条件,并做出X5032型万能升降台铣床电气原理控制线路图,确定PLC的选择和程序的设计。
关键词:X5032;PLC;改造;电气系统
Abstract
The graduation project is focused on transformation of X5032 type universal lifting platform milling machine electrical circuits. Studying the basic structure and X5032 type universal lifting platform milling machine principle and the existing X5032 type universal lifting platform milling machine electrical circuits were understanding. A preliminary understanding of the basic structure of X5032 type universal lifting platform milling machine characteristics and technical parameters, as well as to analyze the existing electrical wiring, decided to use PLC to reform systems now in use, and to explore its feasibility. Check out a great deal of information, literature and are fully familiar with the old device of relay control circuit based on decisions on electrical circuit transformation of X5032 type universal lifting platform, determine the input signal and the output signal can be used as a PC's condition and made X5032 type universal lifting platform milling machine principle of electrical control wiring diagram, determine the selection and process design of PLC.
Key words: X5032; PLC; Transform; Electrical system
目 录
前 言 1
1.X5032的介绍和基本理论介绍 2
1.1 机床改造的目的及意义 2
1.2 X型5032万能升降台铣床和电气控制线路图的基础介绍 2
1.3 X5032型万能升降台铣床改造的内容 3
1.4 运用PLC的改造方案 3
1.5 运用PLC改造的步骤 4
2.X5032型万能升降台铣床电气线路的分析 5
2.1 主电路的分析 5
2.2 控制电路的分析 5
2.2.1 主轴电动机的控制 5
2.2.2 进给运动的控制 6
2.2.3 圆形工作台的控制 7
2.2.4 其他控制 8
3.运用PLC的改造方案简介及应用 9
3.1 PLC的概述 9
3.1.1 PLC的控制 9
3.1.2 PLC的I/O分配 10
3.1.3 PLC程序的设计 11
3.2 PLC的基本结构 11
3.2.1 CPU模块 12
3.2.2 I/O模块 12
3.2.3 编程器 13
3.2.4 电源 13
3.3 PLC的基本工作原理 13
3.4 PLC语言的特点 15
3.4.1 梯形图(Ladder Diagram)程序设计语言 15
3.4.2 布尔助记符(Boolean Mnemonic)程序设计语言 15
3.4.3 功能表图(Sepuential Function Chart)程序设计语言 15
3.4.4 功能模块图(Function Block)程序设计语言 15
3.4.5 结构化语句(Structured Text)描述程序设计语言 16
3.5 PLC编程的步骤 16
3.5.1 阅读产品说明书 16
3.5.2 根据说明书,检查I/O点 16
3.5.3 打开编程软件,进行硬件配置,并将I/O地址写在符号表中 16
3.5.4 写出程序流程图 17
3.5.5 在软件中编写程序 17
3.5.6 调试程序 22
3.5.7 调试完成后,再次编辑程序 22
3.5.8 保存程序 22
总 结 23
参考文献 24
致 谢 25